Pair of very unique adjustable angle (approx. +/- 10 degrees) individual floating shelf brackets for solid wall fixing with up to 15 KG weight capacity, or hollow wall fixing using these anchors, click here 2 are required per bracket. Weight capacity would then be up to 5 KG, depending on the strength of the gyprock sheeting. The bracket base size is 75mm wide x 16mm deep, galvanised steel with 2 fixing holes spaced at 55mm centres.Fixing holes are slotted to allow further fine adjustment when screw fixing to the wall. The angle of the support rod can be adjusted by tightening or loosening the small screws in the bracket base piece to ensure shelf is at an ideal angle to the adjacent wall surface. The solid steel support rod is 110mm long x 11mm diameter. Suitable for custom manufactured floating shelves of thickness 20mm (2cm) and above and with a maximum depth of 250mm. Use a minimum of 2 brackets per shelf, we recommend at least one bracket is used every 500mmm spacing in a solid/brick type wall. Ensure bracket is fitted the correct way up to allow the angle of the support rod to be adjusted as required.