Floating Shelf Bracket 630Lx170Dx30D

Suits a floating shelf in size 65-120cm in length 25cm depth and 35mm plus in thickness.
Bracket is screwed to the wall (there are 7 predrilled holes in bracket base) and the shelf slipped on to the pipe arms.
Shelf is secured through two holes. Pipe arms have a slight upward angle to compensate for any shelf droop when shelf is loaded up.
Bracket base piece is 63cm long x 3cm deep and is 4.5mm thick.
Pipe arms are 19mm diameter, 17cm long from front face of base and 51cm from the centre to centre of both pipes.
Multiple holes provided for fixing to the wall, however other holes can be drilled if required to coincide with studs in a hollow wall fixing situation. Weight capacity can be up to 25KG of evenly distributed load if fitted correctly to solid brick type walls. (depending on wall type, fixings used, shelf size and importantly depth). Weight capacity decreases when used to support deeper or longer shelves, or fitted only to plasterboard sheeting in cavity type walls. (weight capacity of the bracket will then be limited to the strength of the plasterboard sheet)
Hollow wall anchors can be used if fitting to cavity type walls available here. Minimum of are 3 required per bracket.