Floating Shelf Bracket 48Lx19.4Dx4Hcm

Description

Suits a floating shelf in size to 600mm in length 350mm depth and minimum of approx. 40mm thickness.
Bracket is screwed to the wall and shelf slipped on to the pipe arms. Weight capacity can be up to 25KG if fitted correctly to solid brick type walls.(depending on wall type, fixings used, shelf size and depth ) Weight capacity decreases when used to support deeper or longer shelves, or fitted only to plasterboard sheeting in cavity type walls. (weight capacity will then be limited to the strength of the plasterboard sheet). Shelf can be secured through two pre drilled holes in the pipe arms. Note the pipe arms have a slight upward angle to compensate for any shelf droop when shelf is loaded up, so bracket must be fitted with the arrow indicator facing upwards.
Bracket base piece is 48cm long x 4cm deep and is 2.5mm thick.
Pipe arms are 19mm diameter and 19.4cm long measured from the front face of base.
Multiple holes are provided for fixing to the wall, however other extra holes can be drilled if required to coincide with studs if fixing to a hollow wall.
Maximum weight rating is only achieved when fixing to solid walls, or into studs in a hollow gyprock type wall. Hollow wall anchors can be used if fitting to cavity type walls available here. Minimum 3 required per bracket.[block id=”floating-shelf-video”][block id=”floating-shelf-bracket-video”]